ProLiant Servers (ML,DL,SL)
1745832 Members
4259 Online
108723 Solutions
New Discussion юеВ

Proliant DL360 BIOS reset

 
KoshiLe
Occasional Contributor

Proliant DL360 BIOS reset

Hi,

The DL360 is booting up and freezing at the logo screen. I have been attempting to reset the BIOS by many different methods. The service manual only states how to put the unit into maintanence mode via the #6 jumper on the SW2 jumper set. I am unable to find any method of booting the unit past the COMPAQ PROLIANT screen. Is there anyway i can get past this?

Thanks
Koshi Le
2 REPLIES 2
KoshiLe
Occasional Contributor

Re: Proliant DL360 BIOS reset

I forgot to add that it is a ProLiant G2
Larry Day
Occasional Advisor

Re: Proliant DL360 BIOS reset

Koshi, I have a "problem-child" DL360-G2 that won't boot at all, after a CPU upgrade. Get a system-board LED amber light on CPU1...on a known-good CPU. Just recently upgraded BIOS to current and upgraded ILO to current (1.82). My question is: SW2 on motherboard only has 4 toggles, but you mention the #6 jumper of the SW2 jumper set. Am I looking in the wrong place? I also need to get this unit into "maintenance mode" to try and figure out why the CPU is reporting "failed." Any help you or others can give, is greatly appreciated!

Larry Day