ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant DL360 Doesn't see harddisks

 
wobbe
Respected Contributor

Proliant DL360 Doesn't see harddisks

I've just put two 72gb U320 10k hard disks in my new proliant dl360 G4 but for some reason the server doesn't see the. The array configuration util says that there are no physical disks connected to the 6i controller. Any ideas?
6 REPLIES
Oleg Koroz
Honored Contributor

Re: Proliant DL360 Doesn't see harddisks

Open top cover, pull the fan assembly, remove SCSI backplane and set it back make sure it locks tide enough.
Jordan_29
Occasional Advisor

Re: Proliant DL360 Doesn't see harddisks

Exactly as KOV says. We just bought 2 new DL360G4's and one of them had this issue. Just pull it out and re-seat it. We had a HP engineer come out to tell us that - how silly did we feel.
wobbe
Respected Contributor

Re: Proliant DL360 Doesn't see harddisks

The problem has been fixed. Thanks. I also spoke a support tech and he told me that this is a know issue with the G4 series.
dem
Occasional Visitor

Re: Proliant DL360 Doesn't see harddisks

what was the problem? the fix?
wobbe
Respected Contributor

Re: Proliant DL360 Doesn't see harddisks

Push down the connector behind the hard disk. Not the one with the flat cable but the one behind it on the main system board.
dem
Occasional Visitor

Re: Proliant DL360 Doesn't see harddisks

thanks. i was about to post that i reseeded the cable and my lsi ultra320 not magically sees my external raid array.

thanks for the reply.