HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant DL360 G2 Power Up Problem

 
Mark Scherf
Occasional Visitor

Proliant DL360 G2 Power Up Problem

If the server is powered down for a few days, it powers up ok.

If I reboot the server, the screen stays blank and nothing appears to happen.

Following the diagnostic flow chart, I get to Check port 85 codes. How do you do this on a DL360 G2.

Thank you
4 REPLIES
James ~ Happy Dude
Honored Contributor

Re: Proliant DL360 G2 Power Up Problem

Hello Mark,

Try clearing the NVRAM by using the System maintenance switch on the System board.

SW6(I think..) .. please refer user documentation.

Regards,
James.
RaMpaNTe
Trusted Contributor

Re: Proliant DL360 G2 Power Up Problem

Check to see which hardware components other that the original configuration you have on the server, Like 3rd party HW or extra memory or extra PCI cards. Try removing them one by one and test to see which one of them is causing this.

Thanks,
\RaMpaNTe
You heve a question... I have an aswer!!!
Mark Scherf
Occasional Visitor

Re: Proliant DL360 G2 Power Up Problem

I've tried clearing the nvram and removing all addon hardware and still have the issue.
audi4rings
Advisor

Re: Proliant DL360 G2 Power Up Problem

I have the exact same issue on my DL380 after smart array, nic and video update.

any solution??