ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant DL360 G2

 
Leyb
Occasional Visitor

Proliant DL360 G2

Hello
I have a distribution Power Bar from Avocent to connect my proliant DL360 G2, but if a user shutdown my server with windows,this server go in stanby mode.
If i send a power off and power on with my power bar,the server is state standby.
It is possible if i send a power on the server wake up automatically.
No option in Bios, No jumper on mother board ?
Thanks in advance
2 REPLIES
Oleg Koroz
Honored Contributor

Re: Proliant DL360 G2

Restore on the Power loss is automated process and depend what happened with server at last moment it will try to go in the same state after power restore
If someone did shut down Server you need to power up it normally, use Lights-Out board or WOL


Leyb
Occasional Visitor

Re: Proliant DL360 G2

it is not possible to server power on automaticcaly after the AC go into the server ? (No in standby mode)
The Ilo is not connected because Avocent is better for the remote(KVM and Power)

Thanks