HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant DL360 G4.

 
Jim Druce
Occasional Contributor

Proliant DL360 G4.

Guys we're getting this error in the IML logs... We logged it with HP and sent a new fan which we duly fitted, but still getting these repeated errors in the IML logs.. Any thoughts much appreciated.

- Fan Failure (Fan 2, Location System)
- System Fans Not Redundant (Location System)

Repeated every 30 seconds or so...

"I don't suffer from insanity; I enjoy every minute of it!"
3 REPLIES
James ~ Happy Dude
Honored Contributor

Re: Proliant DL360 G4.

Hello Jim,
Have you upgraded the Firmware ? Try using the firmware maintenance CD 7.91

Also, the ilo controller drivers, as per this advisory:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01045065&jumpid=reg_R1002_USEN
(although there are no event ID in ur case)

& also refer:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00602242

Regards.
Mi6t0
Trusted Contributor

Re: Proliant DL360 G4.

And did you try setting the error to "repaired"?

If firmware doesnot help, you will have to call HP Support again for a new board.
~sesh
Esteemed Contributor

Re: Proliant DL360 G4.

Hi, are the IML errors still reporting the fault with Fan 2? If so, after updating the system ROM, swap the fans between slot 2 & other slot. See if the error still persists on slot 2. If it does, it could very well be a fan slot problem.

If not, may be bad luck & you received a DOA fan.