ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant DL360 G6 Systems management Homepage

Clancy Group
Occasional Contributor

Proliant DL360 G6 Systems management Homepage

We have added an additional RAID controller to our DL360 but SMHP still reports the onboard controller as well and therefore thinks the system status is bad as the onboard controller is not confiugured. Anyone know how to tell it (systems management Homepage) not to monitor the onboard controller?
2 REPLIES
gregersenj
HPE Pro

Re: Proliant DL360 G6 Systems management Homepage

Hmm.
I have seen lately, that it is possible to ignore an unconnected NIC, by ticking a check box.

Perhaps, there's something similar for the internal SA.

BR
/jag
Rancher
Honored Contributor

Re: Proliant DL360 G6 Systems management Homepage

If you are not using the onboard controller, I think you will have to disable it in the BIOS so the homepage won't pick it up. That is what we do. If you remove the SCSI or the array information from the managed agents, they won't monitor the controllers you are using.