ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant DL360Gen9 config with scripting tools

andy_msc
Occasional Contributor

Proliant DL360Gen9 config with scripting tools

Hi,

I have a Proliant DL360 Gen9 and need to config all UEFI settings with scripts.
I use conrep to set all the UEFI settings I need.

I have a HPE Ethernet 10Gb 2-port 560SFP+ Adapter installed and need to set the following:

I need to set F9 -> System Utilities -> System Configuration -> Slot 2 Port1 : HPE Ethernet 10Gb 2-port 560SFP+ Adapter - NIC -> Device Level Configuration -> Shared Memory Features -> Disabled

This setting is not saved in the config file generted with conrep -s because it's "outside" of the RBSU settings.

What linux scripting tool can I use to get to this setting?

Thanks.

 

1 REPLY
Jimmy Vance
HPE Pro

Re: Proliant DL360Gen9 config with scripting tools


@andy_msc wrote:

Hi,

I have a Proliant DL360 Gen9 and need to config all UEFI settings with scripts.
I use conrep to set all the UEFI settings I need.

I have a HPE Ethernet 10Gb 2-port 560SFP+ Adapter installed and need to set the following:

I need to set F9 -> System Utilities -> System Configuration -> Slot 2 Port1 : HPE Ethernet 10Gb 2-port 560SFP+ Adapter - NIC -> Device Level Configuration -> Shared Memory Features -> Disabled

This setting is not saved in the config file generted with conrep -s because it's "outside" of the RBSU settings.

What linux scripting tool can I use to get to this setting?

Thanks.

 


Currently none of the HPE scripting tools can modify the settings on add-in cards.  You might check with the NIC vendor as they may have a tool

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!