Proliant DL380 Beeping

[George Perselis]

Evertime I start the DL380, I get long audible beeps, one after another about 1 second apart from each other. Screen stays blank and does not post. Anyone have a clue?

[Basil Vizgin]

You got 2 long beeps?
What color of health indicators near the power button?
If internal health is red, remove a cover and look into the red leds on motherboard. Schema on cover explains leds.
What generation is your DL380?
Also you can look into troubleshooting guide.
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00300504/c00300504.pdf

[George Perselis]

the color of the health is red, i assume this is not good, lol. Also the machine keeps beeping, one after another and does not stop.

First light is RED
second light is YELLOW

I dont know what generation it is, but its a dual pentium 3.

[Cameron Todd]

Have any cards been added into the server?

Have the memory DIMM's been re-seated?

[Oleg Koroz]

reset riser, pull out all memory and install only minimum, swap with another memory if it won't work first time, pull all card from riser, clear NVRAM last step

[Oleg Koroz]

First red, second amber, PIII - check left top corner if you have G2 (gray color bezel).

Open top cover check for amber LED, see User Guide for more help
http://h20000.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_203840-003_rev3_us/TPM_203840-003_rev3_us.pdf