ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant DL380 G4 No POST after Cleaning

 
Motealleh
Occasional Visitor

Proliant DL380 G4 No POST after Cleaning

Hi, I've 3 HP Proliant DL380 G4 Servers which do not pass POST after cleaning with blower. they stop on 01100001 (0x61h) state (iLO STATUS LEDs on the main /board) during POST Progress. i shutdown the servers but not plug out the power, then remove the fans and clean them with the blower, then clean inside the servers with blower too, after that when I turn on the each server there is no video signal on the monitor. when i remove the RAMs the server check them and make beeps. I don't know what to do?
 
1 REPLY
Suman_1978
HPE Pro

Re: Proliant DL380 G4 No POST after Cleaning

Hi,

 

Refer to Minimum Hardware Configuration for Troubleshooting.

 

You can try clearing NVRAM from the System Maintenance Switch.

 

Thank You!
I am a HP employee.