HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant DL380 G6 and ILO monitoring

 
GreDeK
Occasional Visitor

Proliant DL380 G6 and ILO monitoring

Hi

 

I am new in monitoring. I would like to monitor and receive the traps from my proliant servers with the ILO port and PRTG. It seems I have to use the SNMP traps service but the PRTG trap sensor asks me the OID value that will be trapped and the port number.

Could you help to understand how it works and tell me where I can find the OIDs for the proliant DL380 G6?

 

Regards

1 REPLY
Suman_1978
HPE Pro

Re: Proliant DL380 G6 and ILO monitoring

Hi,

 

Take a look at this link, hope this helps you.

 

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01430245