Proliant DL380 G7 virtualization setting in BIOS

[DLT]

Hello,

I have a Proliant DL380 G7 that I want to install Microsoft Windows 2008 R2 Ent. with Hyper-V and I need to make sure the hardware assisted virtualization is enabled in the BIOS.  is there a document/link on HP site that shows the recommended BIOS settings for virtualization? 

Thanks,

D

[Johan Guldmyr · Accepted solution]

Hi, why not just boot into BIOS and see if it's enabled or not?

If there is a document it sounds like it would be a whitepaper.

See this page: https://support.hpe.com/connect/s/product?language=en_US&cep=on&kmpmoid=1840669&tab=manualsAndGuides

And at the bottom there is a link to a whitepaper.

See direct link to "Implementing Microsoft  Windows  Server 2008 Hyper-V ™ on HP ProLiant server" for more information: https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=c01516156

[Moderator edit: Updated the broken links]

[DLT]

Thanks!! the pdf doc is what I needed!!