ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant DL380p G8 and Disk controller P420i issue

 
DiegoLop
Occasional Contributor

Proliant DL380p G8 and Disk controller P420i issue

Dear all,

 

i tried to install MS W2k8 x64 R2 Std. Ed. on a HP ProLiant DL380p Gen8 E5-2609 1P 8GB-R P420i/ZMR SATA SFF 460W PS Server/S-Buy server but the OS doesn't load the drivers for P420i disk controller.

 

I downloaded all the drivers for the disk controller for Microsoft Windows Server 2008 R2 and Microsoft Windows Server 2008 x64 on the HP Driver page and after uncompress these i copied all to a USB key.

 

When OS prompt for the drivers it is found in the USB key but after the progress bar check a several times OS inform that the driver doesn't match with the disk controler.

 

I attach a screenshot of the OS message.

 

Do you know how i could fix it ?

 

Thanks in advance for your help.

2 REPLIES
Torsten.
Acclaimed Contributor

Re: Proliant DL380p G8 and Disk controller P420i issue

Did you try this?

http://h18013.www1.hp.com/products/servers/management/intelligentprovisioning/index.html

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   

Re: Proliant DL380p G8 and Disk controller P420i issue

Try installing through Intelligent Provisioning. Also look out for the issue noted in the following document:

 

 

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c03440070&prodTypeId=15351&prodSeriesId=5177957

 

 

 

 

Regards,

 

Vijayasarathy

I work for HPE
Views expressed herein are my personal opinion and is not the views of HPE
To say thanks click the white "thumbs up" icon below!!!