ProLiant Servers (ML,DL,SL)

Proliant DL380p Gen8

 
hevilp
Occasional Visitor

Proliant DL380p Gen8

Hi,

I got a Prolaint DL380p Gen8 from my friend, without any hard drive.

I did a factory reset (removed batterie) and did latest fw upgrade, successfull.

Then I resetted the NAND, but I still got

 

Controller firmware revision 2.10.00 Embedded media manager failed media attach 

 

 

How can I fix?

Redundant ROM Support

The server enables you to upgrade or configure the ROM safely with redundant ROM support. One side of the ROM contains the current ROM program version, while the other side of the ROM contains a backup version.

Active ROM System ROM record not found System ROM Date record not found Backup ROM Backup ROM record not found Bootblock Date record not found

2 REPLIES 2
hevilp
Occasional Visitor

Re: Proliant DL380p Gen8

The problem is, I'm unable to get into boot menu, because its restarts while POST

Sebasbin
HPE Pro

Re: Proliant DL380p Gen8

Hi hevilp,

This is an issue of the NAND Flash of the iLO Board. You can format the NAND Flash and reinstall the Intelligent Provisioning software.

Please find the following advisory:
https://support.hpe.com/hpesc/public/docDisplay?docId=c04996097

Also update the BIOS and ILO firmware to the latest version.


I am an HPE Employee

Accept or Kudo