HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

Proliant DL580 Using ASR-2

Gary St. Pierre_1
Occasional Contributor

Proliant DL580 Using ASR-2

A DL580 using ASR-2(Automatic Server Recovery) is from time to time doing a warm reboot. Now the IML viewer says "ASR Detected By System ROM" Error Type "Critical". and Windows 2000 or 2003's Event viewer Just says unexpected shutdown has occurred. Now, my question is, is this a software problem? or a hardware problem? or is it a software problem caused by a piece of hardware? or viceversa. Oh! by the way, in case you are thinking about a external device that is connected to this server, the only thing connected to this server is: Monitor, Mouse, Keyboard & network cable.
Prashant (I am Back)
Honored Contributor

Re: Proliant DL580 Using ASR-2


Disable ASR in F10
1) Reboot server and select F9 (or F10) to enter RBSU
2) From the main RBSU menu select "Automatic Server Recovery"
3) Select "ASR Timeout"
4) Select number of minutes desired for the timeout value.

Prashant S.
Nothing is impossible