ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant Dl360e gen8 abrupt shut down for NIC Interface

 
Donthejeweller
Occasional Visitor

Proliant Dl360e gen8 abrupt shut down for NIC Interface

Hi,

We have a Oracle RAC deployment(on OEL 6.4) with two nodes(Proliant Dl360e gen8) connected each other through private LAN through a CISCO mananaged switch.

Recently we have observed that any status change(up/down/freeze) in the Private LAN NIC causes one of the node(standby node) to reboot abruptly.Later we connected the two nodes directly through ethernet cable bypassing the switch and after a while one of the standby node got rebooted abruptly.

We still do not understand the root cause of the problem and looking for some input from this forum.

 

Thanks in advance.

 

 

 

 

 

 

1 REPLY 1
KSINGH_2018
HPE Pro

Re: Proliant Dl360e gen8 abrupt shut down for NIC Interface

The provided details are insufficient to isolate any hardware specific issues.

If the server is under Active Warranty/Carepack/Contract then kindly log a case using HPE Support Case Manager and share the relavent logs (AHS) for deep dive analysis.

Sharing one of the latest known issues in reference to a similar concern which might be helpful:

Advisory: (Revision) ProLiant Servers with Certain Intel Xeon Processors - CRITICAL SYSTEM ROM UPGRADE REQUIRED to Prevent a Rare Possibility of System Crashes or Unpredictable System Behavior in Virtualized Environments that Utilize Intel VT FlexPriority

https://support.hpe.com/hpsc/doc/public/display?docId=c03898077

CSCB ISS L2 – GSD CSC | Technology Services, Enterprise Group