ProLiant Servers (ML,DL,SL)

Proliant G10 Partitions

Occasional Visitor

Proliant G10 Partitions

I have a Proliant G10 and need to partition the harddrive.   It is 1.2 TB total space.  We create it with Raid 6 ADG.  We need one Partition for the operating system at 200 GB with the rest of the space to the remaining parttion.  With the G10 I am unable to create the partitions with these deminision.  Although when using the G9 we were able to create it this way.  Both are usinge 2012 r2.

Any help would be appriciated

Thank you 


Re: Proliant G10 Partitions


What changed between Gen9 and Gen10 is the Smart Array Controller and Server itself.

Check if the controller in Gen10 supports this process, some controllers may require firmware update or a cache module.

Thank You!

I am a HPE employee
Was the post useful? Click on the white KUDOS! Thumb below.  Kudos is a way of saying thank you to a post.
// Useful Links for ProLiant Servers / Community FAQ / Rules of Participation / Servers Blog //

I work for HPE

Accept or Kudo

Jimmy Vance

Re: Proliant G10 Partitions

WHat controller are you working with? You should be able to create multiple logical drives within an array


No support by private messages. Please ask the forum!