ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant G380 G4 RIS Issue

Mike_954
Occasional Visitor

Proliant G380 G4 RIS Issue

Evening,

I am presently trying to RIS a couple of G380 G4 servers and am not having any luck.

It fails to load the 'MassStorageDrivers' during the 'Textmode' part of the setup. I have all of the files in the right place within the RIS Image itself.

Any one else had this issue?

Thanks
Mike Mooney
1 REPLY
Brian_Murdoch
Honored Contributor

Re: Proliant G380 G4 RIS Issue

Mike,

You should make sure that the Smart Array 6i controller is at firmware 2.36A. This resolves a PXE/RIS problem on DL360G4 and DL380G4 servers due to an IRQ sharing issue.

Please see the following customer advisory.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_EM041123_CW01

I hope this helps.

Brian