HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

Proliant ML 330

Bob Carthage
Occasional Visitor

Proliant ML 330

I have a Proliant ML 330 in Japan that is giving me problems booting. The last integrated management log I see is this:
Abnormal Program Termination (BugCheck, STOP: 0x0000007A (0xC0300718, 0xC0000185, 0xC01C6FC4, 0x1C3F8884)) which occurred a month ago. I don't know if this error message is related to my problem.
The server begins bootup and indicates it finds the IDE Raid Controller and then hangs on Scanning of Primary Device0 ...
The IDE Raid BIOS Version is 2.5.07251128C.
Any help would be appreciated.
Oleg Koroz
Honored Contributor

Re: Proliant ML 330

Verify From RAID configuration status on the HDD online or offline, it happens when One Drive fail and prevent system from boot, till failed HDD disconnected. Run CHK DSK for sectors Problem from ERD