ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant ML 350 G5

Doug Vandygriff
Occasional Visitor

Proliant ML 350 G5

This server quit repsonding on the network the other day, the end user was instructed to do a safe shutdown and power back up, same issue. Reboots were tried, same result. After she just shut it down via the power button it starting responding on the network again. I went out there and put them a new gigabit switch and a new patch cable for the server and I got the same result. Had to just power it off at the login splash screen, and this was after several reboots and safe shutdowns. The nic is a HP NC373i, anyone else with similar issues before on this paticular server? Ping test back to my corporate were Destination host unreachable but I could get to the internet.
4 REPLIES

Re: Proliant ML 350 G5

You can try cmos clear and nc373i firmware update.

os version ?

regards.
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
Doug Vandygriff
Occasional Visitor

Re: Proliant ML 350 G5

Running Server 2003 Standard SP2.

Re: Proliant ML 350 G5

Hi

fw and driver update.

HP NC-Series Broadcom Online Firmware Upgrade Utility for Windows Server 2003/2008
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121586&swItem=MTX-4b3d298ae85b497b8332f3a471&prodNameId=3279711&swEnvOID=1005&swLang=8&taskId=135&mode=4&idx=1

HP NC-Series Broadcom 1Gb Multifunction Driver for Windows Server 2003
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121586&swItem=MTX-56add26daef34554842664a9f9&prodNameId=3279711&swEnvOID=1005&swLang=8&taskId=135&mode=4&idx=2

regards
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
Doug Vandygriff
Occasional Visitor

Re: Proliant ML 350 G5

Thank you very much I will try that and let you know.