Proliant ML 350 Temperature Monitoring

[Gavinm]

Hi could someone remind me what port I need to use to access the Proliant Web management page to view system temperature / fan status etc. I used to be able to type http://ip~address:port number.

Thanks
Gavin

[Mauro Rusignuolo]

standard is 2381 ... it seem to me ...

on the server is:

https://127.0.0.1:2381

bye.

TJK.

[KarloChacon]

or if you configure SNMP using localhots

it can be

https://localhost:2381

which basically is the same
regards

[Gavinm]

Thanks both of you 2381 is what I needed!!

[Mauro Rusignuolo]

thank you for the "assigned points" ... :-)

bye.

TJK.

[KarloChacon]

Gavinm

remember it that was helpful some points are not bad at all


regards