ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant ML10 gen9 installation SBS 2008 problem

piaa
Occasional Visitor

Proliant ML10 gen9 installation SBS 2008 problem

I have been trying for a week now to install SBS 2008 on out new Proliant ML10 Gen9 without success.

At last I have changed to legacy boot and then the server finally started to install.

But it hangs alaready at the screen where to select language and keyboard. No mousepointer at the screen (tried every USB-connection and another mouse too). Cannot move with the tab or ALT+ commands either. The system is frozen and all I can do is power off.

Now I have run out of ideas how to make this installation. It feels like it does not try to access the hard drives at all (has set up the two 1TB disks for RAID 1)

Any suggestions or help, please?

 

1 REPLY

Re: Proliant ML10 gen9 installation SBS 2008 problem

ml10 gen9 support only 2012 / R2 and 2016 server.

other windows servers are not compatible.

Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.