Proliant ML110 G5 SATA RAID driver for Windows 2003 server

[shambark]

Im trying to install WS 2k8 R2 on my new ml110 g5 but the installation stops where i should chose disk drive to install it on. The problem is that windows doesent recognisess the raid controller and HP cd doesent work with it because it is intel 82801 raid contoler. Where can i find driver for this RAID controler so i can sucessfully install windows server 2008 r2.
thanks

[Alborz-Mahmoodi]

HI,
first of all you should enable your embedded
Sata controller on RBSU and after that try to install the Operating system.

[shambark]

i did. first thing i did is enabled it. than i set it up in raid 2 mode and afterward tried to install the WS 2008 r2.

Help please :)

[Daniel Bowers]

Maybe Gino Liljeblad's instructions toward the bottom of this thread might help:

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1417950

[Sheanshar]

Based on quickspecs this box has a Integrated 6 ports SATA controller with embedded RAID

The drivers listed for this controller are for Windows 2003 Server 32 or 64 bit

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=443244&taskId=135&prodTypeId=329290&prodSeriesId=443243〈=en&cc=us&submit=Go%20%C2%BB


This server supports Smart Array Controller and the HP4/8 Internal Port SAS HBA RAID. The website has drivers for Windows Server 2008 R2 for these

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3577715&prodTypeId=15351&prodSeriesId=3577708&swLang=8&taskId=135&swEnvOID=4064#113214

HP ML110 G5 technical specifications
http://h18000.www1.hp.com/products/quickspecs/12867_div/12867_div.HTML

Let me know if additional help is needed

[Miguel Martins]

Hello, see the chipset of the sata raid control and download the generic driver from the manufact.
regards