ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant ML110 & NT 4.0 Server

sergio ramirez_1
Occasional Contributor

Proliant ML110 & NT 4.0 Server

He would want to install in a Proliant ML110 the operating system NT 4.0 Server, every time that I make it in the screen of driver load, it is restarted without allowing me to install it
3 REPLIES
JohnWRuffo
Honored Contributor

Re: Proliant ML110 & NT 4.0 Server

Sergio:

Windows NT was not certified on the ML110 so, the driver sets were not developed for deploying the server with this O/S.

That said, does your server have the SATA controller or are your drives SCSI? What controller do you have installed?

Let us know and we may be able to get this server going.
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
sergio ramirez_1
Occasional Contributor

Re: Proliant ML110 & NT 4.0 Server

The driver that I am using in that of the card adaptec 29160 (it is this the one that I have installed in my team)
JohnWRuffo
Honored Contributor

Re: Proliant ML110 & NT 4.0 Server

You installed an additional PCI Adaptec 29160 SCSI card in place of your on-board controler ? , ...then you need to use the Adaptec drivers:
http://www.adaptec.com/worldwide/support/driverdetail.jsp?sess=no&language=English+US&cat=/Product/ASC-29160&filekey=fms_on_cd_v40a_sp3a.exe
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt