ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant ML110G6 driver needed

Eiwen
Occasional Visitor

Proliant ML110G6 driver needed

i have installed windows server 2008 sbs in this way (Anuar Obregón tip)because the easy setup cd does not support 2008 sbs installation:

1 - Boot with easy setup CD
2 - Select HP Branded windows server 2008 R2 standard.
3 - When prompted for operating system disk, turn off your server.
4 - Reboot with no operating system disk on the server.
5 - You'll get an error of an unatended installation file, press OK.
6 - Using command prompt go to DVD (d:) and execute WS2008_setup.exe
7 - Continue normal installation

Then Installing BIOS System ROM from HP driver download. All work fine, only one unknown device can´t find his driver.

How can i find this?

Regards.
1 REPLY
Wayne Henegar
Frequent Advisor

Re: Proliant ML110G6 driver needed

This does not help your driver issue, but I think you will find SBS2008 on the easy CD if you don't look under branded software. SBS purchased from HP will install fine under the NON-branded install, at least it did for me in two installs.

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1434170