ProLiant Servers (ML,DL,SL)
1745795 Members
3513 Online
108722 Solutions
New Discussion юеВ

Proliant ML30 gen10 dedicated vga problem!

 
pikokk
New Member

Proliant ML30 gen10 dedicated vga problem!

Hi, I'm trying to mount a dedicated vga (nvidia 1030) on a ml30 gen10, but when I mount it, it performs the initial check (all ok), then it stuck on the hp enterprise logo and doesn't continue, it doesn't appear
the screen where you can press F10 to enter Ilo, any idea ??

2 REPLIES 2
Jazz_ISS
HPE Pro

Re: Proliant ML30 gen10 dedicated vga problem!

Hello, 

Unfortunately NVIDIA 1030 is not listed under the quickspecs for ML30 Gen10 so I cant confirm whether reported issue is caused by unsupported hardware or not.

Refer Page 24 :-

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00053821enus

 

 


I work for HPE

Accept or Kudo

chrislee18a
Occasional Advisor

Re: Proliant ML30 gen10 dedicated vga problem!

If you connect your monitor to the on board vga, after POST the output should shift to the vga card itself, this maybe the reason.
I am a HPE Employee.