Proliant ML310 ATA RAID Controller

[Dean Mitchener]

Hey all

Looks like this nifty little server doesn't have an ATA integrated raid controller driver for Netware 5.0. HP site has drivers for 5.1 6.0 6.1 and 6.5. I contacted LSIlogic the folks that oem the controllers and was given a driver to try with no guarantees etc. The Netware installation accepts the driver but is looking for a slot number, giving three choices 10003, 10004, 3 these don't work :/

The bios messages say the controller is at PCi bus 00 and the device is number 02. I have put in all kinds of numbers but to no avail. Before I give up on this idea and force my end user to go to MS SBS server or wait till 6.5 SBS Netware ships next week and pay at least $300-00 I would like to know if there is a PCI ident programme that can give me a listing of slots per PCI device? I saw a couple of articles on the web, which says the device number on pci bus, wouldn't be the slot number.
LSI say if the driver is asking for slot numbers then it generally wont work :/
Any ideas? Seems a shame to have to force end user to upgrade on this point.

Any help would be appreciated.

Thanks

Dean