Proliant ML310 - G2 with 2nd SATA controller

[Peter V.]

Hi,

I want to use an Adaptec 2410SA card configured as the Boot Controller inside a Proliant ML 310-G2.

During the Setup process, SmartStart 7.2 reports that "There is no bootable drive configured on this system" (Boot Controller Disk Size is at 0 MB). It must search for the embedded controller, I suppose...

Is there a way to use SmartStart with this configuration or do I have to manually install the OS ?

Thanks !

[Igor Karasik · Accepted solution]

SmartStart support only HP SmartArray controllers, so you need to do manual OS installation.

[Peter V.]

See solution above