HPE Community
ProLiant Servers (ML,DL,SL)
1753361 Members
5175 Online
108792 Solutions
New Discussion

Proliant ML310 & Adaptec

 
BR728903
New Member

‎01-21-2003 04:56 PM

‎01-21-2003 04:56 PM

Proliant ML310 & Adaptec

I have an ML310 and I want to setup the Adaptec 3210s SCSI controller. It does not seem to allow me to use it no matter what I do. I can build a RAID 5 and run 2K setup but then it does not find it. Is there a trick to this or does anyone have an idea?

Thanks
0 Kudos
Reply
1 REPLY 1
CA835871
Honored Contributor

‎01-21-2003 10:10 PM

‎01-21-2003 10:10 PM

Re: Proliant ML310 & Adaptec

You need to install the driver for it. That RAID card is too new for 2k to have the driver for it. When you boot up on the 2k CD, you need to use the F6 key when it asks if you have any third party devices. Hit f6 and it will ask for the driver in the floppy drive.

The drivers are here:
http://www.adaptec.com/worldwide/support/drivers_by_product.html?sess=no&language=English+US&cat=/Product/ASR-3210S

Those are the latest from Adaptec. They are over a year old, but they have nothing newer.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.