HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant ML310e Gen8 Intelligent Provisioning Firmware update error

 
pcug
Collector

Proliant ML310e Gen8 Intelligent Provisioning Firmware update error

Proliant ML310e Gen8 Intelligent Provisioning Firmware update for Intelligent Provisioning, using Intelligent Provisioning, throws a "File not found" error, after downloading and attempting to flash the image.

File "/usr/lib64/python2.6/gzip.py",line 79,in__init__ fileobj = self.myfileobj = __builtin__.open(filename, mode or 'rb')
IOError: (Errno 2) No such file or directory: '/tmp/flash_update/gaius.img.gz'

This is for Intelligent Proisioning image version 1.63.

 

2 REPLIES
Jimmy Vance
HPE Pro

Re: Proliant ML310e Gen8 Intelligent Provisioning Firmware update error

How are you accessing the recovery image ISO?  Virtual Media using iLO, burn to DVD media, or boot from USB stick.  If the later, did you use the USB Key utility included in the ISO image? Usually when there is an issue it is booting from USB and the HPE utility wasn't used to create the bootable image

 

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
pcug
Collector

Re: Proliant ML310e Gen8 Intelligent Provisioning Firmware update error

I said that I accessed it using intelligent provisioning. I also have since installed the latest proliant service pack. I just tried it again, again using the intelligent provisioning to download the image, with the same result.