Proliant ML350 Beep Code

[Eric Brown_4]

On power-up this server will not boot, but gives the beep code 2 long, then 2 long and 2 short. I haven't been able to find this code anywhere. Anyone recognize it?

The server is a G1 ML350, PIII/600Mhz.

[Eric Brown_4]

Sorry, I just noticed this posted to the netserver area. Can a moderator please move it to the Proliant area? Thanks.

[amhakassa]

Hi Eric,

I am sorry I couldn't find 2 long, 2 long and 2 short. I have found the following

2 long and 2 short is :

"The power has cycled because the temprature is too hot. The processor fan is not installed, or is not spinning."

So Check your fan.

regards
Amha Kassa

[Prashant (I am Back)]

Hi

As we cannot able to devoce the beep
If we can open the server and look for
System Board Leds
That will check for
System power
Memory
Processor
PPM
Server Feature Board

If we can only remove the server top cover and look for same information. Check Image it will help you


Reagrds,
Prashant S>