Proliant ML350 G3 and HP StorageWorks DAT 160 SCSI

[Hence]

Problem solved. I forget to terminate the SCSI Cable. Thank for the respond.

[Hence]

Problem solved. I not yet terminate the SCSI cable. Thank for the response.

[gregersenj]

Sorry, been away a few days.

No - You did not forget the terminator :)
Since you did, then you're not using the cable, that came with the server, wich got a fixed terminator.

Just a note to the warnings in L&TT.
I would expect to get a warning, due to the use of a slower SCSI controller, than the drive.

And if a newer FW rev. is avaiable.

Good thing you got the problem solved :)

Have a nice weekend, all of you.
/jag