ProLiant Servers (ML,DL,SL)
1748128 Members
3678 Online
108758 Solutions
New Discussion

Proliant ML350 G5 Server - will not power on and no lights are on..

 
dondiw
Occasional Visitor

Proliant ML350 G5 Server - will not power on and no lights are on..

Morning,

 

I have a ML350 server which is dead (no power and no warning light are lit). I have re seated the power supplies and rerouted the power cable but still no power or lights. I am thinking it may be the board as I don't think both power supplies could have gone bad at the same time.. Any ideas from the forum would be appreciated.

 

Thanks,

 Don

2 REPLIES 2
PGTRI
Honored Contributor

Re: Proliant ML350 G5 Server - will not power on and no lights are on..

hi,

 

I think that the both PSUs are gone. I know that is very unusual that both are dead, but it happens sometime. The issue can be related to the systemboard or the power backplane, but my advice is to check the PSUs first.

 

Thanks

 

regards,

How to Say Thank You? Just click the KUDOS!
pwjc
Occasional Contributor

Re: Proliant ML350 G5 Server - will not power on and no lights are on..

Hi

 

I have the same thing. 

 

It hapend after a power cut. It was attached to a UPS both supplies are not working at all. 

 

We are a small business and cannot afford to buy kit we dont need. There are no lights on the supplies at all.

 

How can I test the supplies to see if they work.

 

Your help is very much appreciated