ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant ML350 Install issue

 
Mike_367
Occasional Contributor

Proliant ML350 Install issue

I am trying to re-install a server. I moved the physical location of 2(of 6) disks. Booted up the server and am attempting to use smartstart to continue. SmartStart comes up to the main page and says "Boot controller disk size = 0" Boot Controller - Compaq Computer Corporation - unknown device 0046. Then under warnings it says "No bootable drive is configured on the system". I cannot launch setup. The system cannot find a controller when scanning. I have setup logical drives and made sure the boot controller is set to primary. Any help would be much appreciated.

Thanks
3 REPLIES
James ~ Happy Dude
Honored Contributor

Re: Proliant ML350 Install issue

Hello Mike,
Which Controller are u using ?

Is there any USB Device connected to the Servere ?

Regards,
James.
Mike_367
Occasional Contributor

Re: Proliant ML350 Install issue

It's a Compaq SmartArray 641 Raid controller. What I ended up doing was just installing via the os disc and using a driver on a floppy to install the controller. It's up and running. Thanks.
Mike_367
Occasional Contributor

Re: Proliant ML350 Install issue

I didn't use the smartstart stuff