Proliant ML350 NT4 reinstall

[Enrique Dentone]

We have to reinstall NT4 on a Proliant ML350. We do not have any of the original CDs that came with the Server, so I boot from CD and get a request to add SCSI drivers. I have downloaded them from http://h18023.www1.hp.com/support/files/server/us/locate/7_1120.html

but NT4 says that there is no device that can be used with the driver on the floppy. I know I created the floppy correctly, and my Smart Array version # is different for what I can download on the link above. On the site it says Smart Array 5300, but my Smart Array on boot up is 431. I cannot locate any driver files for the 431 that will assist me in reinstalling NT4.

Any ideas, please let me know. Thanks!

[Brian_Murdoch]

Hi Enrique,

Please try the following link.

http://h18023.www1.hp.com/support/files/server/us/download/15646.html

I hope this helps,

Brian

[Brian_Murdoch]

Enrique,

Just to add to my earlier reply.

The above driver kit (CP002547.EXE) can be opened with Winzip or WinRAR etc. and extracted to a floppy disk so that you can manually install the driver at the F6 prompt. Have a look at the README.TXT file included in the kit. Sorry I did not mention this earlier.

Regards,

Brian