ProLiant Servers (ML,DL,SL)
1745804 Members
3416 Online
108722 Solutions
New Discussion юеВ

Re: Proliant ML350 Server and PXE errors

 
Brian_284
New Member

Proliant ML350 Server and PXE errors

Hi,

I recently installed Windows 2000 Server over Windows NT Server on my Proliant ML350 box.

I am now getting two PXE errors.

PXE-E61 - Media Test failure, check cable
PXE-MOF - Exiting PXE ROM

The machine then attempts to boot of the floppy and cd drives. Then the Intel boot Agent Version. But all I get is the "Non-System disk or disk error message."


Any help would be gratefully appreciated.

Thanks
2 REPLIES 2
Martin Breidenbach
Honored Contributor

Re: Proliant ML350 Server and PXE errors

These PXE mean it tries to boot from the network and there doesn't seem to be a cable connected.

The main question is why it doesn't boot from hard disk.

What is your hard disk configuration ? Which controller ? RAID ?

After you installed W2K - did it work ?

If you update NT4 to W2K you first must uninstall the NT4 Compaq drivers. AFAIK there's a special utility to do this.

BTW - is a network cable connected ?
Brian_284
New Member

Re: Proliant ML350 Server and PXE errors

Hi,

Thanks for the reply. Yes, the cable is connected.

After the 2000 installation, it did work for a period.

I dont have a RAID operation in effect on this server. Just a single 9.1 GB disk (which is working fine).

Is there a way I can disable the PXE boot and instead boot from the disk?? I have tried the BIOS (06/17/2000), but it doesnt seem to give me the option.

Would there be a problem with my Server Feature Board????