Proliant ML370 G3 array controller 641 battery status trap

[Jeff Dix]

Storage agents occasionally reports 'Accelerator Board Battery Failed' (approx. once every few few months) with the accelerator board being disabled as a result. A few days later the status come back up as enabled and everything is OK.
Insight Management Agents confirm the status of the board.
Driver v5.68.0.32 (20/05/05)
Firmware v2.58 rev B

[Edwin Gnana Sekar]

Hi Jeff,

First Update the Controller Firmware V 2.68 A.http://h18023.www1.hp.com/support/files/server/us/download/24879.html.
It will take 72 Hours to fully charge the battery. You can verify the Battery status through array configuration utillity or insight manager.
If it is doesn't works then you have replace the array Accelerator battery.

Regards
Edwin P