ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant ML370 G3 fan failure

SOLVED
Go to solution
Rey Bilodo
Occasional Visitor

Proliant ML370 G3 fan failure

Guys need help on this,
I Have a post error message "Fan Solution Not Sufficient", i already replaced the 3 failed fans with a known good fan, but still don't work.
I also checked the cables, but i seems fine.
What can i do next? Is my systemboard defective?
6 REPLIES
KarloChacon
Honored Contributor

Re: Proliant ML370 G3 fan failure

any LED close to fans or in the front panel?

The hot-plug fan LED indicates the following conditions:
Green = The fan is operating normally.
Amber = The fan has failed.
Off = The fan is not powered or is not seated.


you have no redundant system fan? redundant system are six fans?

regards

Didn't your momma teach you to say thanks!
Rey Bilodo
Occasional Visitor

Re: Proliant ML370 G3 fan failure

I have 6 fans installed, 3 of them failed(amber led)
KarloChacon
Honored Contributor

Re: Proliant ML370 G3 fan failure

Ok 6 fans are for redundancy.

ok

if you already replace them for new ones

1.try updating System ROM
2. look any message error in IML (Integrated Management Log) and System Management Home Page.


let's see what's going on

regards



Didn't your momma teach you to say thanks!
Dmitry_75
Valued Contributor
Solution

Re: Proliant ML370 G3 fan failure

Hi Rey!

Sorry, but one way to repair you server - replace MB. Now you probably have MB with
spare part number 290559-001, and you can purchase same, but best choice 316864-001 w/o fun problems.


Rey Bilodo
Occasional Visitor

Re: Proliant ML370 G3 fan failure

Thank you all guys! I'll try what you've suggested...
Rey Bilodo
Occasional Visitor

Re: Proliant ML370 G3 fan failure

I replaced systemboard and works fine.....
thanks for the advice..