ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant ML370 Server

 
Asim Rana
Occasional Visitor

Proliant ML370 Server

Hi All,

I have one ML 370 server. There are two processor in server of specs (P3 1 GHZ 133 MHz). One processor of server was faulty. I replaced the processor in warranty.
After installing new processor it showed error (212 Processor 1 failure).
When I check both processors in slot 1 separately it working properly. But when I install both processors at the same time this gives error. (212 Processor 1 failure).
Please advise me in above situation .
The operating System running on server is Windows Nt Server

Thank you

Asim Rana
3 REPLIES
Robin_37
Trusted Contributor

Re: Proliant ML370 Server

Hi Asim
Install both the processor and Run the F10 system configuration utility and save the configuration
Vijay_44
Honored Contributor

Re: Proliant ML370 Server

Make sure the BIOS is updated as well, it may be that there is a big stepping difference between the two processors. While in the SCU clear your NVRAM and rerun the SCU.
There’s your problem!!! This thing is set to EVIL!
Tad Nall
Frequent Advisor

Re: Proliant ML370 Server

make sure you installed little power controller card so it can run second processor