ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant ML370 - Temperature Sensors

 
Mikee_4
Occasional Visitor

Proliant ML370 - Temperature Sensors

I'm have HP Proliant ML370 server (2CPU installed).
HP Insight Management Agents for Windows show me 4 temperature sensors
1. CPU
2. CPU
3. IO Board
4. CPU
That mean temperature sensor №4?
7 REPLIES
Oleg Koroz
Honored Contributor

Re: Proliant ML370 - Temperature Sensors

See by threshold; two close identical would be your CPU, Other would be different zone. From environment.
Mikee_4
Occasional Visitor

Re: Proliant ML370 - Temperature Sensors

I'm understand, but I want know What is CPU 4. See attach.
Oleg Koroz
Honored Contributor

Re: Proliant ML370 - Temperature Sensors

In your case
1 CPU Zone
2 CPU #1
3 I/O Zone
4 CPU #2

Oleg Koroz
Honored Contributor

Re: Proliant ML370 - Temperature Sensors

You have two CPU, one Overall CPU Zone behind Heatshink and One I/O Zone
Mikee_4
Occasional Visitor

Re: Proliant ML370 - Temperature Sensors

thanks, i'm understand.
now I'm will think about high temperature 2 CPU
Oleg Koroz
Honored Contributor

Re: Proliant ML370 - Temperature Sensors

Yes, look over fan speed for CPU zone it's HIGH, should be NORMAL
Consider verifying Firmware: System ROM Updates, System Management Driver, System agents, only if it's SW problem. Verify grease compound between CPU and Heatsink.
Oleg Koroz
Honored Contributor

Re: Proliant ML370 - Temperature Sensors

Just another Home Page for compare