ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant ML370G3 powerup

Ivan S. Velichkin
Occasional Visitor

Proliant ML370G3 powerup

Hello, all.
Give me please advice on how can I realize autopowerup of my server at occurrence of power supplies.
Sorry for my bad english.
3 REPLIES
Bruno Mesquita_1
Frequent Advisor

Re: Proliant ML370G3 powerup

In RBSU (F9 at POST) you can find an menu option to enable Autopower On after power failure.

Server Availability > Automatic Power On >> Enabled or Disabled

Regards
(Remember to give points)
Ivan S. Velichkin
Occasional Visitor

Re: Proliant ML370G3 powerup

This option I can see in RBSU of DL360 380 g4.. etc. But in RBSU (updated with latest updates) of ML370 g3 I can only see the following options:
System Options
PCI Devices
Standard Boot Order (IPL)
Boot Controller Order
Date and Time
Automatic Server Recovery (ASR)
Server Passwords
Server Asset Text
Advanced Options
BIOS Serial Console
Utility Language
Bruno Mesquita_1
Frequent Advisor

Re: Proliant ML370G3 powerup

Server Availability > Automatic Power On >> Enabled or Disabled exists in ML350 G4 and it seems that doesn't exist in ML370 G3.

If the shutdown is gracefully done there is no way to the server starts automatically.

In ML370 G3 the ASR-2 should restart the server if the system hangs.
Look at this guide, section Automatic Server Recovery-2.
http://h20000.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_281992-002_rev2_us/TPM_281992-002_rev2_us.pdf

Regards.