ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant ML530 Memory Support

Bryan H.
Occasional Contributor

Proliant ML530 Memory Support

Does anyone know if the Proliant ML530 G1 has any support for 2GB Sync 133MHz CL3 ECC memory? Is a firmware update available for the server to recognize this size memory? I have 2 x 2GB sticks from HP that I would like to install in this server, as it is an exchange / application server. Any help would be appreciated. Thank you.

-Bryan
3 REPLIES
Oleg Koroz
Honored Contributor
DangKhoa
Occasional Advisor

Re: Proliant ML530 Memory Support

Hello there,

Here are some conditions for memory on ML530 G1:

- Use only 64-, 128-, 256-, or 512-MB SDRAM DIMMs.
- SDRAM DIMMs must be 133-MHz registered (buffered).
- Use only Compaq DIMMs. DIMMs from other sources are known to adversely affect data integrity.
- Do not install DIMM modules supporting different speeds. All DIMMs installed must be the same speed.
- Install SDRAM DIMMs in the following socket sequence for maximum performance:
DIMM 1
DIMM 5
DIMM 2
DIMM 6
DIMM 3
DIMM 7
DIMM 4
DIMM 8

And here are part numbers for you to order DIMM
128279-B21 512-MB PC133-MHz Registered ECC SDRAM DIMM Memory Option Kit

128278-B21 256-MB PC133-MHz Registered ECC SDRAM DIMM Memory Option Kit

128277-B21 128-MB PC133-MHz Registered ECC SDRAM DIMM Memory Option Kit

128276-B21 64-MB PC133-MHz Registered ECC SDRAM DIMM Memory Option Kit

Hope that helps
Prashant (I am Back)
Honored Contributor

Re: Proliant ML530 Memory Support

Hi Bryan,

Yes KOV is correct we can have 4 GB
Buer per slot can support Max of 512MB DIMM.
If you can give the part no's we can confirm further about the memory compatibility. Since it is purchased from HP.

REgards,
Prashant S.
Nothing is impossible