ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant ML530 and Tekram SATA controller TR-824

 
matveev
Advisor

Proliant ML530 and Tekram SATA controller TR-824

I have installed Win 2003 on Proliant ML530 G2 without raid controllers.
When I'm insert controller in PCI slot and reconfigure hardvare, after reboot scisi boot disk not aveleable and system don't boot. What do I made for solve this problem?
4 REPLIES
Oleg Koroz
Honored Contributor

Re: Proliant ML530 and Tekram SATA controller TR-824

Update BIOS for Server and Card
Install card to different slot
Verify Boot Order and BIOS settings
If no go -> HW conflict -> Incompatibility
matveev
Advisor

Re: Proliant ML530 and Tekram SATA controller TR-824

How can I set Boot order for controllers, explain please.
matveev
Advisor

Re: Proliant ML530 and Tekram SATA controller TR-824

When I disconnect disk from controller - windows boot normaly and controller driver is ok/ When I connect disks to controller system not boot with message insert system disks. How can I set boot order disks on scisi controller first and sata controller secont.
Oleg Koroz
Honored Contributor

Re: Proliant ML530 and Tekram SATA controller TR-824

Only small % of Proliant servers would allow you to change boot controller order 1 - for 3rd party cards, however without trying you can say so
How to change see file


http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00191707/c00191707.pdf

search for boot Order