cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant ML530

 
CA1058494
Occasional Visitor

Proliant ML530

I'll try to make this as simple as possible. I have a Compaq ML530 server setup with 4 hard drives/Raid 5. It is setup with two containers, Disk-0 and Disk-1. Disk-0 is configured with 2GB and Disk-1 is setup for 48.8GB. Is there anyway I can reconfigure the Disks short of having to rebuild the whole server? Could I add an extra hard drive and configure the new space to Disk-0? Any suggestions would be appreciated.

 

 

P.S. This thread has been moved from Disk, Disk Arrays (Legacy) to ProLiant Servers (ML,DL,SL) - HP Forums moderator

Ain't no place for a nervous person