ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant ML570 G3 does not boot

Stanislav Bebej
Occasional Visitor

Proliant ML570 G3 does not boot

Hi all, my Proliant ML570 G3 server doesnt boot. When I switch it on, it hangs up without showing anything on the screen. Howewer, the fans make twice that noise as usuall.
Thank you for your answers.
Stano
4 REPLIES
Akos Hegedus
Valued Contributor

Re: Proliant ML570 G3 does not boot

Hi,

do you have any LEDs lighting on the system board?

regards,
Akos
Stanislav Bebej
Occasional Visitor

Re: Proliant ML570 G3 does not boot

Hi,
yes, there is red LED blinking, the meaning according to the manual is that "System health is critical" = Flashing red. I dont know, what does it mean exactly and what can I do to solve the problem. Should I call the HP support? Or my vendor?
Thanx
Stanislav Bebej
Occasional Visitor

Re: Proliant ML570 G3 does not boot

The LED is on the front panel, I forgot to say :-)
Robin_37
Trusted Contributor

Re: Proliant ML570 G3 does not boot


hello Bebei

1)Remove the Processor and reinstall it again.

2)check Ram is installed properly.

regards

Robin