Proliant ML570 can't use Itegno GPRS Wireless modem

[Erwin Febrianto]

I just try to use Itegno 3000 GPRS wireless modem to use on HP Proliant ML570, but it can't work (can't dial out), but when I try to Diagnostic the modem is working good. and I try to use on Proliant ML350 and the GPRS modem works fine. is there any body can help me with this problem

Regards
Erwin Febrianto

[Prashant (I am Back)]

Hi Erwin,

No Such compatibility matrix but if you can share more infomraiton regarding your card what is voltage requirement and other

Where as PCI Information for my Proliant ML570
1 PCI 64-bit, 33MHz Non-Hot Plug PCI Bus 2 Available
2 PCI 64-bit, 33MHz Hot Plug PCI Bus 2 Available
3 PCI 64-bit, 33MHz Hot Plug PCI Bus 2 Available
4 PCI 64-bit, 66MHz Hot Plug PCI Bus 3 Available
5
PCI 64-bit, 66MHz Hot Plug PCI Bus 3 Available
6
PCI 32-bit, 33MHz Non-Hot Plug PCI Bus 1 Available

Regards,
Prashant S.

[Erwin Febrianto]

Sorry I forget to inform, Itegno 3000 GPRS Modem Connected via USB cable. it's connected via PCI card.

Regards
Erwin Febrianto