HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant Server Installation via iLO over a WAN connection

 
Seif Esmailjee
Occasional Visitor

Proliant Server Installation via iLO over a WAN connection

I have to setup and install Windows 2003 Server on a new Proliant DL 380G5 which is based at a remote site.
I have access to the site over a WAN connection.
I have the Advanced Light Out licence and a resource locally who can power up the server and load the Smart Start CD.
Is it possible to do the installation remotely through the iLO and is there a White Paper with information on how to do this?
Thanks
Seif
1 REPLY
Víctor Cespón
Honored Contributor

Re: Proliant Server Installation via iLO over a WAN connection

Hi, the connection to ILO is done through a SSL (port 443) like any secure web-page.
Virtual media uses port 17988, so you'll have to open that on the firewall and do NAT on router or whatever you need to access the server.

Check: http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1149838