HPE Community
ProLiant Servers (ML,DL,SL)
1753928 Members
9074 Online
108810 Solutions
New Discussion юеВ

Proliant storage encloser problem

 
SOLVED
Go to solution
Mike_993
Occasional Contributor

тАО08-31-2005 06:44 AM

тАО08-31-2005 06:44 AM

Proliant storage encloser problem

I have Proliant DL 580
Has 5300 array controller
Any time I rebout after it's Initiates the 5300 array the message comes out "Proliant storage encloser problem" I have to prease F1 to compleat rebout. After that it runs without the problems.

Please Help
0 Kudos
Reply
2 REPLIES 2
Terry Hutchings
Honored Contributor

тАО08-31-2005 06:54 AM

тАО08-31-2005 06:54 AM

Solution

Re: Proliant storage encloser problem

What's the text listed after "storage enclosure problem detected"? Is it "wide scsi transfer failed"? If so, then it's likely a problem with a bent pin or a kink in the cable going from the controller to the drive backplane.
The truth is out there, but I forgot the URL..
Reply
Terry Hutchings
Honored Contributor

тАО08-31-2005 06:54 AM

тАО08-31-2005 06:54 AM

Re: Proliant storage encloser problem

This error I mentioned will also allow you to boot to Windows, but it will be slower than it should be.
The truth is out there, but I forgot the URL..
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.