Prolitian DL380 G7 Smart Array Card Problem

[danic2]

Goodmorning everyone,
I recently purchased a Proliant DL380 G7 for my home lab and I connected an SSD on which I installed ESXi 6.7.
I exported a 2TB volume from the NAS with NFS protocol to ESXi which sees it correctly.
The problems are:
1. ESXi detects an undefined error on the vmhba0 card (Smart Array P410i)
2. SSD is unusable (on datastore browser an error appears)
3. All the VMs running on the 2TB NFS datastore are terribly slow (CPU and RAM have nothing to do with it and the old server used the same NAS but was faster)
4. When I try to stop the server the red health led turns on and the machine does not turn off.

Can you kindly help me with these problems?
Thanks a lot!

[SanjeevGoyal]

Hello,

Please let me, this is a local boot ( from the local hard disk) or SAN boot.

I would like to know "When I try to stop the server the red health led turns on and the machine does not turn off." as well as share the below-required information to isolate the issue.

Is the server is booting to OS?

Is the server is powering ON?

If the server is completing the POST?

If the server is powering ON, what is coming POST?

If this is a local boot, suspecting the SA controller faulty.

Please share all above required information.

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,

[Mastera]

Hello, DL380 G7 Not support esxi 6.7