ProLiant Servers (ML,DL,SL)
1748159 Members
4104 Online
108758 Solutions
New Discussion юеВ

Re: Quad Core - Proliant ML150 G3

 
Mauro Rusignuolo
Trusted Contributor

Quad Core - Proliant ML150 G3

I've installed a quad core XEON processor model E5320. all were OK. today I've tried to install the second one. no way to boot. do you have any information about that? thanks a lot.
<> Leonardo da Vinci
8 REPLIES 8
ramesh_naik_
Esteemed Contributor

Re: Quad Core - Proliant ML150 G3

Hi,

Try to upgrade the Systems ROMPaq to the latest and then try to add the second processor in case you have not tried that.

The latest Systems ROMPaq Firmware Upgrade is available here:
http://h18023.www1.hp.com/support/files/server/us/download/26445.html


Hope this works!!!!!

Regards,
rmn
Mauro Rusignuolo
Trusted Contributor

Re: Quad Core - Proliant ML150 G3

Hello,
thank for interesting in my question.
I've already installed the latest bios version.
No way. It doesn't work.
I've installed, alternatively, the single processor on 3 indentical machine. They works.
when I try to install the second one, after plugging in the power cord and pressing the power-on button, the fan start at maximum speed for a few seconds; after of that, the fan reduce their speed for an half.
the system stay in this situation for minutes.
powering off and popwering on again, using the power on button, the fan start at half speed; in the same way I've "stopped" the system.
Unplugging the power cord, system restart like at I say at the beginning.
I called HP techical support.
they says it's the first case...
may should be necessary a new bios version...
do you have any other idea?
many thank.
bye.
TJ
<> Leonardo da Vinci
KonR
New Member

Re: Quad Core - Proliant ML150 G3

Hello!
I have the same problem with E5310 processors.
HP support have no ideas.

Do you resolve this problem?
Mauro Rusignuolo
Trusted Contributor

Re: Quad Core - Proliant ML150 G3

yes.
I bought 33 pcs of DL360 G5 ...
<> Leonardo da Vinci
Mauro Rusignuolo
Trusted Contributor

Re: Quad Core - Proliant ML150 G3

excuse me ...

I was kidding.
I mean: no way to solve the problem.
only to change the server.
<> Leonardo da Vinci
KonR
New Member

Re: Quad Core - Proliant ML150 G3

Thank for response!

Is't HP advise to change server model, or they replay nothigs?
KarloChacon
Honored Contributor

Re: Quad Core - Proliant ML150 G3

well weird
customer advisory
Document ID: c01038053

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01038053

regards

Didn't your momma teach you to say thanks!
Mauro Rusignuolo
Trusted Contributor

Re: Quad Core - Proliant ML150 G3

thank you for the advice.
I've already seen that.
but doesn't solved the problem.
I mean: my problem.

In any cases, my problem was a little bit old ... and I've been "forced" to find another solution ...
<> Leonardo da Vinci