ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Question to Raid Controller

 
SOLVED
Go to solution
Christian Bieletzki
Frequent Advisor

Question to Raid Controller

I have an "ML 570 R01" with a broken Raid controller. Is there a way to replace the controller and get the NVRAM configuration in order to maintain the DISK configuration for the raid array? I remember that it was possible on HP LH3000 servers to restore the NVRAM configuration from the disks.

Kind regards
Christian
Bille
1 REPLY
Oleg Koroz
Honored Contributor
Solution

Re: Question to Raid Controller

If you lost only controller, you should fine and boot normally after replacement. If you cleared NVRAM you need:
http://h18007.www1.hp.com/support/files/server/us/download/13227.html Create first two diskettes only
verify firmware for array Controller also